Minoura FCG-310 Manuale Utente Scaricare il pdf

FCG-310

Wheel Dishing Tool – instructions manual

Thank you for purchasing the Minoura

FCG-310

wheel dishing tool.

This is the tool to check if the wheel is exactly symmetrical for better ride. You can use FCG-310 on most size of wheels

sized 18" – 29" / 700c (Diameter : 335 – 655mm). Thru axle type hub is applicable up to 15mm size.

Please read this instructions manual carefully before use and fully understand the mechanism of bicycle wheel prior to

actual job.

IMPORTANT NOTES

FCG-310 is the measuring gauge for bicycle wheel only. Do not use it for any other purpose than

instructed.

FCG-310 is a precision tool so please handle it with care. Do not hit or bend the frame and gauge

plate. Please note the stainless gauge plate cannot be replaced.

Be careful not to pinch your ngers when openning or closing the FCG-310.

Knob Bolt

Gauge Plate

Ratch

Frame

Rim Guide

Positioning Lib

How To Use FCG-310

To open the FCG-310, loosen the Knob Bolt then open the Frame with both hands.

Look for the grooves on the inside of the Ratches that fix the angle when the Frame is opened.

Extend until the grooves meet and lock into place by pushing them each other.

Turn the Gauge Plate counter-clockwise to locate the hole at the down end side.

Put the Gauge Plate on the flat groove on the outside of the Ratch.

Tighten the Knob Bolt, but you don't need to tighten it so firmly at this moment.

If the Gauge Plate doesn't t to the at groove

on the Ratch correctly, you won't be able to

measure properly. And also the Gauge Plate

will have to be bent.

Please be sure that the Gauge Plate cannot be

replaced due to the construction.

Attach the FCG-310 to the wheel as shown in Fig. A.

While keeping both Rim Guides touching the rim, loosen the Knob Bolt to slide down the

Gauge Plate, then tighten the Knob Bolt firmly to record the triangle point.

(Fig. A)

At this moment, make sure the following points;

• Both Rim Guides touch the rim.

• The wheel axle is running through the hole on the Gauge Plate, and the Gauge Plate touches

the hub. It is improper that measuring by attaching the gauge to the wheel axle end.

Minoura is not responsible to any result you will have by using FCG-310. Wheel is one of the

most important part for safety. Do it at your own risk.

(Ver.1.2 2014/6)

Hole for wheel axle

Remove the quick release skewer from the wheel. If the wheel is a plain nut type, remove the nuts.

Minoura offers 1-year limited warranty to this product from the date of your purchase. It covers

only the problems which have been caused by the manufacturer's defects.

1 2

Sommario

Pagina 1 - How To Use FCG-310

FCG-310 Wheel Dishing Tool – instructions manualThank you for purchasing the Minoura FCG-310 wheel dishing tool.This is the tool to check if the wheel

Pagina 2 - How To Fold Down FCG-310

6.Flip over the wheel and attach the FCG-310 onto the opposite side of the wheel.Do not change the Gauge Plate position yet.At this time, if all thre

Commenti su questo manuale

Nessun commento

Minoura FCG-310 Manuale Utente

Navigare online o scaricare Manuale Utente per Per biciclette Minoura FCG-310. MINOURA FCG-310 User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Per biciclette Minoura FCG-310